Setting The Directv Rating Limit - RCA HD Receiver User Manual

Using the Profiles
2. Use the digits or the up and down arrow buttons on the remote control to enter
a single-program spending limit.
3. Lock the system. See "Locking the System" near the end of this section for
details.
After a spending limit is set and the system is locked, you must enter a password to
purchase a Pay Per View program that costs more than your spending limit allows.
The system will then temporarily unlock the limits you have set until the power is
turned off. When the system is turned back on, the system will be locked again.

Setting the DIRECTV Rating Limit

The Set Ratings Limit menu enables you to set a maximum viewing limit for rated
®
DIRECTV programming.
• Note that the ratings limit cannot be enforced if a DIRECTV program has not
been rated, if rating information for that program is not transmitted by the
program provider, or if the system has not been locked.
1. Select a user.
2. Select DIRECTV Setup.
3. Highlight Set Rating Limit and press OK.
Use the arrow buttons on the remote control to move the selector up
and down.
4. Use the up and down arrows to move the rating selector to the highest rating
you want to be able to view. In the preceding illustration, movies that are rated
up to and including a PG-13 rating can be viewed.
After the rating limit is set and the system is locked, you must enter the system
password to watch programs with a rating higher than the limit. The system will then
temporarily unlock the limits you have set until the power is turned off. When the
system is turned back on, the system will be locked again.
52
Important!
You need to lock the
system in order for
rating limits, channel
limits, viewing hours,
and spending limits to
go into effect.
To edit the limits after
you lock the system, you
need to enter the
system password. See
"Locking the System" for
details.
Please note that the
rating limit you set
while in the DIRECTV
Setup menu apply only
to the specified profile
and to DIRECTV
programs—they do not
apply to TV programs.
To set limits for TV
programming, select a
profile, select TV Setup
and then select Set TV
Rating or Set Movie
Rating.