Prerequisites For Flexible Netflow; Configuring Flexible Netflow - Cisco Catalyst 3850 Series Configuration Manual

Configuring Flexible NetFlow

•
•
•
•
•
•
•
•
•
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.

Prerequisites for Flexible NetFlow

The following are prerequisites for your Flexible NetFlow configuration:
• You must configure a source interface. If you do not configure a source interface, the exporter will
• You must configure a valid record name for every flow monitor.
OL-28354-01
Finding Feature Information, page 15
Prerequisites for Flexible NetFlow, page 15
Restrictions for Flexible NetFlow, page 16
Information About Flexible NetFlow, page 17
How to Configure Flexible NetFlow, page 29
Monitoring Flexible NetFlow, page 43
Configuration Examples for Flexible NetFlow, page 43
Additional References, page 46
Feature Information for Flexible NetFlow, page 47
remain in a disabled state.
Cisco Flexible NetFlow Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3850 Switches)
2
C H A P T E R
15