4-13 Rear cover
1. Remove two screws.
2. Push the metal clip on the parallel port down and
remove the rear cover from the main frame.
4-14 Top cover
1. Before you remove the ADF roller, you should
remove:
– OPE cover (see page 4-3)
– Rear cover (see above)
2. Remove two screws securing the top cover from
the back side of the machine.
Samsung Electronics
3. Remove two screws and slide the left and right
paper guides fully inward. Then spread the
bottom of the top cover and lift the cover to
remove.
Paper guides
Disassembly and Reassembly
4-9