Table of Contents
Related Manuals for Sencor SLE 1960
Summary of Contents for Sencor SLE 1960
- Page 1 SLE 1960 LED Television operation. Keep it for future use. Record the model number and the serial number of the television. See the label on the rear cover and provide this information to your vendor in the event that you...
-
Page 2: Table Of Contents
Table of Contents Important safety measures ..........3 1. -
Page 3: Important Safety Measures
Important safety measures If you want to use this product correctly, carefully read this user's manual and store it for future reference. If you give (sell) the appliance to somebody, please also include all the documentation together with this appliance, including this user's manual. The ash symbol in an equilateral triangle indicates that there is dangerous voltage inside this appliance, which presents a risk of injury by electrical shock. - Page 4 Important safety measures • The appliance must not be exposed to dripping or running water and objects lled with water must not be placed on it, e.g. vases. Protect the appliance against rain, spray or contact with any other liquid, do not leave or install the appliance outdoors. Do not use the appliance outdoors. Not adhering to these instructions creates a risk of electrical shock or re hazard.
- Page 5 Important safety measures Note: If the appliance is powered by an adapter, use only the adapter and AC power cord supplied with the appliance. Do not use faulty power sockets. Check that the power plug is properly inserted into the power socket.
- Page 6 Important safety measures • The incorrect use of batteries may cause the leakage of the electrolyte and corrosion. To ensure that the remote control works correctly, proceed according to the instructions below: Do not insert the batteries in the wrong polarity orientation. Do not charge, heat, open or short circuit the batteries.
- Page 7 Important safety measures Notes on the USB connector: USB memory devices must be inserted into the appliance directly. To prevent data transmission failure or its interference, do not use USB extension cables. Electrostatic discharges may cause the appliance to malfunction. In such an event the user must restart the appliance. Before using a USB ash drive test its ability to communicate with the appliance and its data reading and writing speed.
-
Page 8: Description Of The Appliance
Description of the appliance 1. Description of the appliance IR remote control sensor Power indicator INPUT button... -
Page 9: Remote Control
Remote control 2. Remote control 1. STANDBY button Turns the television on from the stand-by mode. 2. SOURCE button Press to select the desired input. 3. Numerical buttons 0-9 Press 0-9 to directly select a TV channel while watching the TV. In teletext mode enter the page number, etc. - Page 10 Remote control 20. REC button Note: Used to start recording (only in DTV mode). Remove the batteries if you will be storing the appliance or not using it for an extended period 21. AUDIO button of time. DTV/MEDIA mode: select a background sound, if •...
-
Page 11: Connecting And Setting Up
Connecting and setting up Connecting and setting up Video (yellow AV) Audio right (red AV) W Audio left (white AV) Component Y (green) Component Pb (blue) Component Pr (red) - Page 12 Connecting and setting up Installing cables Please carefully read the entire user's manual before installation and operation. 1. Take the TV out of the packaging and place it on an even rigid surface. Note: Before connecting or disconnecting a TV, computer or other devices it is necessary to check that the power cord is disconnected.
-
Page 13: Selecting An Input Source
Selecting an input source 4. Selecting an input source Press the SOURCE button to show the input source list. Use the / or SOURCE buttons to select the required input source. Press the OK button to con rm the input source. Press the EXIT button to exit the menu. -
Page 14: Initial Setup
Initial setup 5. Initial setup Use an antenna cable to connect the television (RF-IN input) with the antenna socket. OSD Language (OSD language) Use the / buttons to select a language for the menus and messages. Mode Setting (Mode settings) Use the / buttons to select a mode. Country (Country) Use the /... -
Page 15: Using The Menus
Using the menus 6. Using the menus 6.1 Picture (Picture) menu Press MENU to show the main menu. Use the / buttons to select Picture (Picture) and enter the menu by pressing the OK/ button. 1. Press / to select the desired item that you wish to modify. 2. - Page 16 Using the menus Use the / buttons to select an item and set the value using the / buttons. Auto Adjust (Automatic adjustment) Press the MENU/ button to automatically set the optimal picture position. H position (H position) Set the horizontal position of the picture V position (V position) Set the vertical position of the picture Phase (Phase)
-
Page 17: Sound (Sound) Menu
Using the menus 6.2 Sound (Sound) menu Press MENU to show the main menu. Use the / buttons to select Audio (Audio) and enter the menu by pressing the OK/ button. 1. Press / to select the desired item that you wish to modify. 2. - Page 18 Using the menus AVL (Automatic volume limiter) Set the automatic volume control function. Use the / buttons to select AVL and then use the / buttons to select On (On) or O (O ). SPDIF Use the / buttons to select SPDIF and then use the / buttons to select O (O ) / Auto (Automatic) / PCM.
-
Page 19: Channel (Channel) Menu
Using the menus 6.3 Channel (Channel) menu Press MENU to show the main menu. Use the / buttons to select Channel (Channel) and enter the menu by pressing the OK/ button. 1. Press / to select the desired item that you wish to modify. 2. - Page 20 Using the menus Manual Scan (Manual search) Use the / buttons to select Manual Scan (Manual scanning) and then use the OK/ button to enter the submenu. Digital Manual Scan (Digital Manual Search) Use the / buttons to select Digital Manual Scan (Digital manual scanning) and then use the OK/ button to enter the submenu.
- Page 21 Using the menus Analogue Scan (Analogue scanning) Use the / buttons to select Analog Scan (Analogue scanning). Channel to Save (Channel to save) Use the / buttons to select Channel to Save (Channel to save): digital number. Color System (Colour system) Use the /...
- Page 22 Using the menus Channel Edit (Channel editing) Use the / buttons to select Channel Edit (Channel editing) and the OK / button to enter the submenu. The coloured buttons are used as short cut buttons for programming channels. First use the / buttons to highlight a channel that you wish to delete, move or skip and then: - With the red button delete the channel.
-
Page 23: Lock (Lock) Menu
Using the menus 6.4 Lock (Lock) menu Press MENU to show the main menu. Use the / buttons to select Lock system (Lock) and enter the menu by pressing the OK/ button. 1. Press / to select the desired item that you wish to modify. 2. -
Page 24: Setup Menu (Setup)
Using the menus 6.5 Setup menu (Setup) Press MENU to show the main menu. Use the / buttons to select Setup (Setup) and enter the menu by pressing the OK/ button. 1. Press / to select the desired item that you wish to modify. 2. - Page 25 Using the menus Teletext Teletext is only available in DTV or ATV mode. Use the / buttons to select Teletext a use the OK/ button to enter the submenu In DTV mode, use the / buttons to select Digital Teletext Language (Digital teletext language). In ATV mode, use the /...
- Page 26 Using the menus OSD Time (OSD display time) Use the / buttons to select OSD Time (OSD display time) and set the value using the / buttons. The following option are available: O (O ), 10 seconds, 20 seconds, 30 seconds, 60 seconds. Sleep timer (Shut o timer) Set the timer period after which the television will turn o automatically.
- Page 27 Using the menus PVR Setting (PVR settings) Use the / buttons to select PVR Setting (PVR settings) and press the OK button to enter the submenu. The system will check whether a USB device is connected. First Time Setup (First time setup) Use the /...
- Page 28 Using the menus Reset (Reset) Use the / buttons to select Reset (Reset) and then use the OK button to enter the submenu. You will be asked to con rm that you wish to perform a reset. Select Yes (Yes) to perform it. EPG menu Press the EPG button on the remote control to enter the EPG menu.
- Page 29 Using the menus ATV / SCART / HDMI / AV / YPbPr PC Setting (PC settings) in the Picture (Picture) menu is only available in the PC mode. Screen Mode (Screen Mode) in the Picture (Picture) menu is only available in the HDMI Input (HDMI input) mode.
-
Page 30: Usb Control
USB control 7. USB control Before entering the USB menu it is necessary to rst insert a USB device, then press the SOURCE button and select the input USB source. Use the / buttons to select USB as the input source and press the OK button to enter the submenu. Use the /... -
Page 31: Movie (Movie)
USB control When the selected item is highlighted, le information will be shown on the right hand side. 7.3 Movie (Movie) Use the / buttons to select Movie (Movie) from the main menu and press the OK button to enter the submenu. -
Page 32: Troubleshooting Guide
Troubleshooting guide 8. Troubleshooting guide Troubleshooting Before contacting the service centre, please perform the following simple checks. If problems persist, disconnect the TV and contact a service centre. PROBLEM POSSIBLE SOLUTION No picture and sound - Check that the power cord is connected to the wall power socket. - Check that you have not pressed the POWER button on the front panel of the TV receiver. - Page 33 Troubleshooting guide Note: Problem in the VGA mode (only for the VGA mode). PROBLEM POSSIBLE SOLUTION The signal is out of range. - Set the resolution, horizontal frequency or vertical frequency. - Check whether a signal cable has not come loose. - Check the input source.
-
Page 34: Technical Speci Cations
SLE 1960 ( " e l i ≤ l l a 100 x 100 mm 440 x 299 x 165 mm 440 x 263 x 43 mm 500 x 333 x 102 mm 2.14 kg 2.00 kg Connection l a i... -
Page 35: Information Sheet
Manufacturer: FAST ČR, a.s., Černokostelecká 1621, 251 01 Říčany, Česká republika Brand Sencor Model SLE 1960 ] " / ≤ ] s l * Power consumption of 32 kWh per year, based on the power consumption of a television, operating... - Page 36 INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS Dispose of packaging material at a public waste disposal site. DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste.
- Page 37 Data on presented documents differs from data on products. Cases when the claiming product cannot be indentified according to the presented documents (e.g. the serial number or the warranty seal has been damaged). Authorized service centers Visit www.sencor.eu for detailed information about authorized service centers.