The Display; Setting Time; Setting Wake To Tone - RCA RP3755 User Manual

THE DIGITAL CD CLOCK RADIO
Protection against main power failures:
1. Remove battery compartment door (located on the bottom of the radio) by
applying thumb pressure to area indicated on battery door and then lift the door
out and off the cabinet.
2. Connect a 9-volt battery connector plug. (6LR61 or NEDA 1604A)
3. Insert battery in the compartment and replace the compartment door.
NOTE: Alkaline (6LR61/NEDA 1604A) batteries are recommended. Carbon-zinc battery may be
used but memory holding time will be substantially reduced. Memory holding time for a
fresh alkaline battery is approximately 8 hours (if radio or alarm are not operated) which
should take care of short, nuisance-type AC power failures. To preserve battery life, the unit
should remain plugged into an AC outlet. As the battery gets older, its voltage drops and
memory may be lost. Be sure to replace the battery periodically. Battery should be removed if
the unit will be stored for more than one month. Leaky battery can badly damage the clock
radio.

The Display

Wake
to Radio
Wake
to CD
Wake
Clock Setting
to Tone
Wake 1
WAKE 1 1 ALL
1
1
Wake 2
CDFM
WAKE 2
2 2 2
AM
AM/PM
indicator
PM
Repeat All
indicator
Countdown/Nap/
Timer indicator
1
RP3755 EN-US rev.2 4-5
Random
playback
TRACK Track number and
TIMER
radio preset number
AM
Function
MEMO
indicator
STEREO
Memory
MHz
KHz
Stereo
Radio frequency
scale
THE DIGITAL CD CLOCK RADIO
SET
Press SET CLOCK WAKE repeatedly to scroll between SET CLOCK, SET
CLOCK/WAKE
WAKE1, SET WAKE2 and LOCK.

Setting time

CL
OPEN
NOTE: NOTE NOTE NOTE NOTE
REV
FWD
1. Press and hold REV REV REV REV REV or FWD FWD FWD FWD FWD to skip fast
2. The time display has a 12-hour format. AM/PM indicator will light to show AM
or PM time respectively.
AM

Setting Wake to Tone

Press WAKE 1
1
Alarm.
CL selection.
2
Press SET CLOCK/WAKE
WAKE 1
OPEN
Press REV
3
wake time.
GRADUWAKE GRADUWAKE GRADUWAKE feature, the alarm tone volume will increase
1. With the GRADUWAKE GRADUWAKE
gradually to its maximum in about 30 to 45 seconds.
2. You cannot adjust the alarm tone with volume.
6/21/01, 2:38 PM
EN
SET
Press SET CLOCK/WAKE CLOCK/WAKE .
1
will appear on the display.
REV FWD
Press REV or FWD
2
to select current time while the
clock icon is displayed.
PM
WAKE 1
to select wake to
1
indicator will light to show
SET
CLOCK/WAKE
.
will appear on the display.
REV
FWD
or FWD to set the
2