Advertisement
Colour Mixing
Adding colours is simple. Mix the natural and the colorant at the given ratio. Then
pour it into the hopper. It will take 10-20 minutes to see changes in the colour. It
is also possible to mix colorant to get new colours. For example, blue and yellow
make green.
G
Maintenance
Regular cleaning of your plastic extrusion tooling during the disassembly
process lengthens tooling life, helps reduce scrap and helps maintain
tighter tolerances on your final product. Use a wire brush and fine metal pick to
clean the threads and the screw assembly.
Note: Common practice is to use a propane torch to burn out excess material
from the tip.
CAUTION: Do not heat excessively or cause material to be red hot.
Noztek UK
info@noktek.com
www.noztek.com
Unit D05, Riverside Business Centre, Haldane Place, Wandsworth., London
SW18 4UQ
44 203 394 6208
5
Advertisement
