5. To replace bobbln caseo (Fig. 7)
Slip bobbin into bobbin case, and draw the thread
through the bobbin case slot 1, away from you, under
tension spring 2. Turn machine back on its hinges expos-
ing base for bobbin case. With bobbin case latch opened,
between thumb and forefinger, slip bobbin into center
hook and drop latch back. Push down bobbin case with
thumb to make sure that case is lacked in position.
Fig. 7
6. To commence Sewing
IMPORTANT-Turn wheel towards you to pickup bobbin
thread.
Allow needle to descend and rise once. The under
thread then appears in the form of a loop out of the
needle hole.
Then lower presser foot by means of presser foot
lever. Draw both upper and lower thread ends under
the presser fot and to the rear.
1t