Freezer Compartment/Ice Compartment Disassembly - Sharp SJ-GF60X-T Service Manual

9. Pull out the pipe cover.
Pipe cover
3. FREEZER COMPARTMENT / ICE COMPARTMENT DISASSEMBLY
Main component
Ice maker ass'y T-SK
C-part. FI-FK
EV cover ass'y
Heater
DEF thermistor holder ass'y
(In vicinity of evaporator)
1. Remove the accessories (cases and shelves of
freezer compartment and vegetable compartment).
• Remove the SW cover.
(When replacement of F-LED PWB ass'y)
2. Remove the Ice maker ass'y T-SK
1) Remove the screw and pull it toward you while
pressing the claw on the front.
2) Remove connector.
□ : claw
Ice maker ass'y T-SK
□
: claw
Ice maker thermistor, Ice maker ass'y, Ice cube heater, I-grill, Ice sensor, Ice cube maker
Proximity switch
F-thermistor, DEF thermistor, Fan motor F
-
Thermo. fuse ass'y, DEF2 thermistor
SW cover
.
Screw
10. Remove the damper.
Damper
Contained parts
CAUTION: Precautions for handling the ice maker ass'y T-SK
• Securely insert the 4 claws. If the claws are not
inserted completely and they come loose,the ice
maker ass'y T-SK could fall down during ice cube
release or it could sag down and make contact with
the ice storage box.
• When connecting the connectors, make sure there
are no connector insertion problems.
3. Remove the C-part. FI-B.
Remove the screw, and pushing the C-part. from
the left side to release the claw at the front.
Screw
29
SJGF60XT
Claw
C-part. FI-B