Table of Contents
Advertisement
RP2461_2_3_7_889U EN
12/31/02
THE CD PLAYER
Resume
EN
When you power off the unit (without
disconnecting power supply), Resume is
automatically activated. It stores the
following settings and modes: Mode
(Repeat/Repeat All/ Random) and EQ set-
ting (Bass Boost). When play mode is on
again, the unit resumes to the settings.
To automatically store current track
when you stop CD play, press STOP but-
ton twice.
Repeating/Intro scan
You can replay the entire CD or one
track as many times as you wish as well
as listen to the beginning of each track
for 10 seconds.
Press mode successively to
1. Replay the entire CD .
2. Replay the current track.
3. Play the beginning of each track for 10
seconds.(The number of the track being
played will be displayed and SCAN will
display.)
4. Press again to de-select the function.
7
11:46 AM
Page 12
Random Playback
1. Press Play/Pause
on the main unit
or Play/Stop
on the remote
control to start playback.
2. Press
to activate random play
back function.
3. Press again to cancel the function.
Remain Time
Press prog•display on the main unit
when CD is playing to toggle between
displaying track elapse time and disc
remain time.
(Available in normal playback mode
only)
Bass Boost
Press bass boost
repeatedly to select
bass boost I and bass boost II.
THE CD PLAYER
Cancel Program
Program
To cancel your program, press and hold
This function lets you listen to the tracks
the mode key when you are in the stop
you selected in the order you want. You
mode. ERASE will appear in the display.
can program up to 24 tracks. The CD
The program will be automatically can-
player must be in Stop mode.
celed.
1. Press and hold prog•display to enter
Exit Program mode
program mode. P icon will appear in the
display.
To exit program mode, press
2. Press
or
to select the track
prog•display in stop mode.
to store.
3. Press prog•display to confirm your
Note : To prevent excessive battery
entry.
consumption, the unit switches off
4. Repeat steps 2 and 3 to store other
automatically in all modes after 30s
tracks.
if no key has been activated.
5. Press Play/Pause button
to listen
to your programming.
Edit Program
To add/edit tracks to the program, enter
stop mode.
1. Press and hold prog•display button
to display program information.
2. Press prog•display repeatedly to
select the program location to edit.
3. Press
or
to select the new
track to store into selected memory loca-
tion.
4. Press prog•display to confirm your
entry.
5. Press Play/Pause
to start pro-
gram playback.
EN
8
Advertisement
Table of Contents
