THOMSON SpeedTouch 546 User Manual page 26

Chapter 2
Local Network Setup
Device settings
Ethernet link check
18
Once you've connected a device, you are able to personalise its settings:
Go to the SpeedTouch™ web pages.
1
In the menu select Home Network > Devices.
2
Click the name of your device, or if the device's settings haven't been
3
personalised yet, click the MAC address of the device.
On the top right, click Configure.
4
Now you can change the device's name, lock its IP address and assign
5
applications and services to the device.
Depending on the SpeedTouch™ model, LED indicators allow you to check your
Ethernet. See "1.2 SpeedTouch™ LED Behaviour" on page 8 for more information.
E-DOC-CTC-20050429-0100 v1.0