Playing Your Lyra Recorder In Your Car Stereo; Playing Your Lyra Recorder On Your Stereo System - RCA Lyra X3000 User Manual

Playing Your Lyra Recorder in Your Car Stereo

A car power adapter is included with your Lyra Portable Multi-media Recorder, allowing you to power your Lyra from the cigarette lighter socket of a car,
truck, or RV. It converts 12-volts to a 4.5-volt output. You can also purchase an optional cassette adapter to let you listen to the Lyra Recorder without
having to wear headphones.
1. If the headphones are attached, remove them. Insert the plug on the cassette adapter into the LINE OUT jack on the player.
2. Set the volume control on the cassette player to your normal listening level. Also set your Lyra Recorder's volume to roughly step 24.
Note: It may be necessary to slightly adjust the Lyra Recorder's volume to attain best overall sound quality.
3. Insert the cassette (Side A up) into your cassette player making sure the cord is placed in the correct position for your type of player.
4. Attach the end of the car cord adapter to the DC IN jack on your Lyra Recorder.
5. Remove the cigarette lighter from the socket, and insert the car cord into the socket.
6. Turn on your Lyra Recorder, and operate the Lyra Recorder to play music as described earlier in the chapter.
7. Control the sound level by using the volume control on the cassette player.
8. When you're fi nished:
A. Remove the cassette adapter from the cassette player.
B. Turn off the Lyra Recorder.
C. Remove the car cord's plug from the cigarette lighter socket.
Cautions: Make sure to place the wire securely into the slot on the cassette in the correct direction for the type of player you have.
The car cord adapter is designed to be used only with vehicles having negative ground electrical systems. Use of any other car cord
adapter may damage your Lyra Recorder and void your warranty.

Playing Your Lyra Recorder on Your Stereo System

Your Lyra Recorder came with a Line Out Cable that you can use to connect your Lyra to your audio system.
1. Make sure your Lyra Recorder is off.
2. Connect the 3.5mm mini-plug end of the cable to the LINE OUT jack on your Lyra Recorder player.
3. Connect the red (audio right) and white (audio left) cables to the corresponding right and left audio out jacks on your stereo system.
4. Turn on the power to your audio system, and select the proper input setting on the audio system that corresponds with the way you've connected the
Lyra Recorder to the audio system.
5. Turn on your Lyra Recorder.
6. Operate the Lyra Recorder to play music as described earlier in the chapter.
Chapter 4
Chapter 4: Playing Files
39