Playing Your Lyra Recorder In Your Car Stereo - RCA LYRA X3000 User Manual

Tip:
You can also use the remote to control many of the play options (play,
pause, stop, etc). The Music Settings banner does not have to be up to
do this.

Playing Your Lyra recorder in Your Car Stereo

A car power adapter is included with your Lyra Portable Multi-media Recorder, allowing you to power your Lyra Recorder from the cigarette lighter socket
of a car, truck, or RV. It converts 12-volts to a 5-volt output. You can also purchase an optional cassette adapter to let you listen to the Lyra Recorder
without having to wear headphones.
1. If the headphones are attached, remove them. Insert the plug on the cassette adapter into the LINE IN/OUT jack on the player.
2. Set the volume control on the cassette player to your normal listening level. Also set your Lyra Recorder's volume to roughly level 24.
Note: It may be necessary to slightly adjust the Lyra Recorder's volume to attain best overall sound quality.
3. Insert the cassette (Side A up) into your cassette player making sure the cord is placed in the correct position for your type of player.
4. Attach the end of the car power adapter to the DC IN jack on your Lyra Recorder.
5. Remove the cigarette lighter from the socket, and insert the car power plug into the socket.
6. Turn on your Lyra Recorder, and operate the Lyra Recorder to play music as described earlier in the chapter.
7. Control the sound level by using the volume control on the cassette player.
8. When you're finished:
A. Remove the cassette adapter from the cassette player.
B. Turn off the Lyra Recorder.
C. Remove the power plug from the cigarette lighter socket.
Cautions: Make sure to place the wire securely into the slot on the cassette in the correct direction for the type of player you have.
The car power adapter is designed to be used only with vehicles having negative ground electrical systems. Use of any other power
adapter may damage your Lyra Recorder and void your warranty.
Chapter 
Music Settings Banner
To change music settings for each song during playback, press the SELECT button (the
Music Settings banner appears). Press the up or down arrow button to highlight different
settings, then press the left or right arrow buttons to make changes to the setting or choose
another option. If necessary, press SELECT to confirm your choice.
To clear the Music Settings banner from the screen, press BACK or wait for it to time out. A
description of the banner follows.
Equalizer Displays the EQ preset for the currently playing song. Press SELECT
to go to the Setup menu and choose the desired EQ setting. See page 26 for more
information.
Play Mode Displays current playback mode (Repeat, Shuffle, etc.). Press SELECT to
go to the Setup menu and choose the desired play mode setting. See page 26 for more
information.
Previous/Play/Pause/Next Rewinds, pauses, and fast forwards the music.
Press the left or right arrow buttons to go backward or forward 30 seconds at a time. To
cancel, press SELECT key.
Stop Stops playing music. Highlight and select stop.
Chapter 4: Playing Files