On/Standby
Status light
light
Blue
Flashing blue
Blue
Off
Flashing blue
Varies
Off
Flashing blue
Lamp light Temp light
Off
Off
Off
Off
Varies
Flashing
orange
Off
Orange
151
Status and solution
Warming up or shutting down; when
warming up, wait for an image to
appear
Standby or sleep mode
Projector is too hot
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• Make sure the environmental
temperature is not too hot
Projector has overheated and
turned off; leave it turned off to cool
down for about five minutes, then do
the following:
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• If operating the projector at high
altitude, turn on High Altitude
Mode
• If the problem persists, unplug the
projector and contact Epson for
help