Hardware Setup
GPIO Pin Header: JGPIO1
This connector is provided for the General-Purpose Input/Output (GPIO) periph-
eral module.
Serial ATA Connector: SATA1~5 (SATA5 for C236/ Q170 SKU)
This connector is a high-speed Serial ATA interface port. Each connector can
connect to one Serial ATA device.
Important
Please do not fold the SATA cable into a 90-degree angle. Otherwise, data loss
may occur during transmission.
Front Panel Connector: JFP1
This front panel connector is provided for electrical connection to the front panel
switches & LEDs and is compliant with Intel Front Panel I/O Connectivity Design
Guide.
2-12