Advertisement
JUTA Solar Charge Controller
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3. Operation
1. Explanation of LCD Graphic Symbol
2 . Explanation of button function:
:Interfaces circular toggling button. Use this button can realize the toggling circularly
among the interfaces. The circular order is as follows: as shown as figure 1
: Parameter adjusting'+'+ button. Besides, under parameter review condition, press this
button for over 5 seconds, and all the parameters will recover to the ex-work setting
state.
:Parameter adjusting'–'button. Besides, at the main interface, this button can turn on
or turn off the load.
3. Parameter review and setting:
After the controller electrifies right, it will enter into
the displaying interface of battery voltage. This
interface is the main interface of the controller. Press
button
following parameters. If the interface can be reset,
press button
number on the interface starts to flicker), then it
enters into the setting interface of this parameter.
After finishing setting, press button
the setting interface, and the number stops
flickering.
3.1 Battery voltage review
As shown as the right figure, the displaying
number is the present
battery voltage.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ningbo Star Solar Co.,Ltd Tel:(86)574 26266608 Fax:(86) 574 26266618 56664636 Email:Sales@pvsolarchina.com Http://www.pvsolarchina.com
to go through the interfaces of the
for long( ＞ 5 seconds, and the
f r long to exit
o
Model :CM3024Z
Hide quick links:
Advertisement
