Tascam DR-701D Owner's Manual page 16

Category Desired action Function name Procedures, buttons used and explanation
Set the date and
time
Turn plug-in
power on
Check information
about the unit
or card
Change the
automatic power
saving function
Change the
backlight setting
Adjust the display
contrast
Set the battery
type
Set the phantom
power voltage
Restore the unit to
its default settings
Format an SD card Format
Unit settings
Set the file name
format
Link multiple trim
controls
Add audio input
through the unit
to the HDMI audio
output.
Change the
timecode source
to HDMI
Make timecode
generator run
even when unit
is off
Check remaining
battery charge
when operating
on USB power
Do not mute
when trim turned
down completely
Set the peak hold
time
Adjust the levels
of this unit and
connected
equipment
16
TASCAM DR-701D
Home Screen w MENU w SYSTEM w DATE/ TIME
Use this function to set the internal clock, which is used for the recording
dates written to files, for example.
Home Screen w MENU w MIC POWER w PLUGIN
Make this setting when using an external mic that requires plug-in power
connected to the EXT IN 1/2 jack.
Home Screen w MENU w SYSTEM w INFORMATION
Use this function to check the unit firmware version and the remaining
space on the card, for example.
Home Screen w MENU w POWER MANAGEMENT w AUTO PWR
Automatic power
SAVE
saving
This function automatically turns the unit off when it is not used for some
time.
Home Screen w MENU w POWER MANAGEMENT w BACKLIGHT
Use this to change the display backlight setting.
Turn the DATA dial while pressing MENU.
Use this to set the contrast of the characters on the display.
Home Screen w MENU w POWER MANAGEMENT w BATTERY
Select the type of battery being used. This setting affects the accuracy of
the remaining battery display.
Home Screen w MENU w MIC POWER w VOL TAGE
Sets the phantom power voltage.
Home Screen w MENU w SYSTEM w INITIALIZE
Initialize
Use this function to restore all settings to their factory defaults.
Home Screen w MENU w MEDIA w FORMAT
Use this function to format cards.
Home Screen w MENU w FILE w NAME TYPE
You can change the characters used in automatically-assigned file names.
Home Screen w MENU w GANG w GRP1 or GRP2
Gang
You can group channels to link their operation.
Home Screen w MENU w HDMI AUD IO ASSIGN w SEL or MIX
This replaces the audio of the selected channel.
Home Screen w MENU w TIME CODE w SELECT
Use this to select the input timecode source.
Home Screen w MENU w TIME CODE w POWER OFF GEN
Use this to make the timecode generator continue running even when the
unit is off.
Home Screen w MENU w SYSTEM w INFORMATION w SYSTEM
(3/3)
Check the remaining battery charge with the AA BAT . LEVEL item
Home Screen w MENU w METER/ TRIM w TRIM MIN
Set whether or not to mute when a trim is turned down completely.
Home Screen w MENU w METER/ TRIM w PEAK HOLD
Use this to change the peak hold time.
Home Screen w MENU w SLATE TONE w OSCILLATOR
Oscillator
Use this to output a signal at the set level.