Samsung VP-A50 Service Manual page 53

Alignment and Adjustment
11. R-Y Hue Plus
1) Camera ÒE-EÓ, 3100¡K color bar chart.
2) Video(output) jack and register of EEPROM.
3) Connect video output jack to vectorscope input
jack and monitor TV jack.
4) Press the ÒF.F (MODE UP)/REW (MODE
DOWN)Ó button so that the OSD state is
ÒADDR:35 DT1:XX DT2:XXÓ.
5) Aim the camera at a color bar chart illuminated at
1500 to 2000 lux.
6) Adjust the ÒPLAY (DATA UP)/STILL (DATA
DOWN)Ó button so that the blue vector is
347 ± 10 deg.
7) Press the ÒSTOP (CONFIRM)Ó button to
memorize setting.
8) DT1 and DT2 become same.
5-10
BLUE VECTOR
347 DEG.
12. B-Y Hue Plus
1) Camera ÒE-EÓ, 3100¡K color bar chart.
2) Video(output) jack and register of EEPROM.
3) Connect video output jack to vectorscope input
jack and monitor TV jack.
4) Press the ÒF.F (MODE UP)/REW (MODE
DOWN)Ó button so that the OSD state is
ÒADDR:34 DT1:XX DT2:XXÓ.
5) Aim the camera at a color bar chart illuminated at
1500 to 2000 lux.
6) Adjust the ÒPLAY (DATA UP)/STILL (DATA
DOWN)Ó button so that the red vector is
105 ± 10 deg.
7) Press the ÒSTOP (CONFIRM)Ó button to
memorize setting.
8) DT1 and DT2 become same.
RED VECTOR 105 DEG.
Samsung Electronics