Binatone Terrain 850 User Manual page 6

3.6 Activating the auto Channel Scan
Channel scan searches for active signals in an endless loop for all
8 channels, 38 CTCSS codes and 83 DCS codes.
a. Press the MENU button 5 times, and the "SC" icon will
flash on the LCD screen.
b. Press the UP or DOWN button to begin scanning channels,
and when an active signal is detected, the channel scan
pauses on the active channel.
c. Press the MENU button six times, and the "CTCSS" icon
flashes on the LCD screen. Press the UP or DOWN button
to begin scanning the CTCSS from 1-38.
d. Press the MENU button seven times, and the "DCS" icon
flashes on the LCD screen. Press the UP or DOWN button
to begin scanning DCS codes 1-83.
e. Press the PTT button to stop the Channel Scanning.
3.7 Call-Ring tone
You can send a Call-ring tone to other PMR users to give an
alert that you want to communicate with them.
Press the CALL button
You will hear a ring tone for about two seconds; "TX" icon
appears on the LCD screen. Any other units within the
transmitting range and tuned to the same channel and
sub-channel (if applicable) will hear the Call-ring tone.
3.8 Selecting a Call- Ring tone
The Terrain 850 is equipped with 15 different types of Call-Ring tones.
a. Press the MENU button 8 times, and CA will display with
the current Call-Ring Tone number flashing on the LCD screen.
b. Press the UP or DOWN button to select the desired
Call-ring tone, with each playing as it is selected.
c. Press the PTT button to confirm your setting.
3.9 Setting the Roger Beep
The Roger Beep is a tone which is automatically transmitted
whenever the PTT button is released. This alerts the receiving party
that you have intentionally ended the transmission, and you are now
in receive mode.
a. Press the MENU button 9 times, and r0 will be displayed
with OF or ON blinking on the LCD screen.
b. Press the UP or DOWN button to select the Roger beep
On/Off.
c. Press the PTT button to confirm your setting.
3.10 Setting the Key Tone ON or OFF
This feature allows the Terrain 850 to emit a confirmation tone after
pressing each button.
a. Press the MENU button 10 times, and t0 will be displayed
with OF or ON blinking on the LCD screen.
b. Press the UP or DOWN button to select the Key tone
On/Off.
c. Press the PTT button to confirm your setting.
Binatone Help Line - 0844 5579677