Biostar I915P-A7 COMBO Manual page 23

4. Overclock Panel
Click the Overclock button in Main Panel, the button will be highlighted and
the Overclock Panel will slide out to left as the following figure.
Overclock Panel contains these features:
a. "–3MHz button", "-1MHz button", "+1MHz button", and "+3MHz button":
provide user the ability to do real-time overclock adjustment.
Warning:
Manually overclock is potentially dangerous, especially when the
overclocking percentage is over 110 %. We strongly recommend you
verify every speed you overclock by click the Verify button. Or, you
can just click Auto overclock button and let [WarpSpeeder™]
automatically gets the best result for you.
b. "Recovery Dialog button": Pop up the following dialog. Let user select a
restoring way if system need to do a fail-safe reboot.
c. "Auto-overclock button": User can click this button and
[WarpSpeeder™] will set the best and stable performance and
frequency automatically. [WarpSpeeder™] utility will execute a series of
testing until system fail. Then system will do fail-safe reboot by using
Watchdog function. After reboot, the [WarpSpeeder™] utility will restore
to the hardware default setting or load the verified best and stable
frequency according to the Recovery Dialog's setting.
915P-A7 COMBO
21