D-Link DUB-104 Quick Installation Manual

4-port usb 2.0 pocket hub

Download this manual

This product can be used with

the following operating systems:

Windows XP, Windows 2000, Mac

OS 8, 9, and 10.1 or above.

Before You Begin

You must have at least the following:

• Pentium 233-MHz or faster or equivalent with 32MB RAM

• Available USB 1.1 Port For USB 1.1 Operation

• Available USB 2.0 Port For USB 2.0 Operation

• Windows XP, 2000, Mac OS 8, 9, or 10/X for USB 1.1 Operation

• Windows XP, 2000 or Mac OS X for USB 2.0 Operation

Check Your Package Contents

These are the items included with your purchase:

If any of the below items are missing, please contact your reseller.

holders. Software and specifications subject to change without notice.

DUB-104 4-Port USB 2.0 Pocket Hub

Power Adapter (5V 2.5A)

DUB-104

4-Port USB 2.0 Pocket Hub

Using a power supply

with a different voltage rating

will damage and void the

warranty for this product.

Page 1: Before You Begin
Power Adapter (5V 2.5A) with a different voltage rating will damage and void the warranty for this product. ©2006 D-Link Corporation. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice.
Page 2 Installing the DUB-104 A. Plug the AC adapter into the DUB-104 and into a power socket in a power-strip or a wall jack. (optional) B. Plug the USB type A dongle (found on the bottom of the DUB-104) into an available USB 2.0 port on your computer...
Page 3: Led Indicator
USB 1.1 device will not work at USB 2.0 speeds. • The DUB-104 does not have an on/off switch. It is always on once the external power adapter has been plugged into a power source or the dongle has been connected to a PC’s USB port.