Yamaha RP-U200 Service Manual page 10

RP-U200
3. DSP
(DSP Test)
Using this menu, it is possible to set the sound field effect
(*1)
and input signals.
There are 14 sub-menus.
(*1) Apply an 1kHz, 150mV signal to ANALOG input
terminal. (Sub-menu 1 to 8)
1. THROUGH
[Remote control code : 7B—16(VDD)]
Passes signals through the DSP section.
2. DELAY
[Remote control code : 7B—1F(TEST)]
Uses the delay function in the DSP section.
3. HALL
[Remote control code : 7B—10(HALL)]
Sets the DSP for HALL.
4. JAZZ
[Remote control code : 7B—11(JAZZ)]
Sets the DSP for JAZZ.
5. CHURCH
[Remote control code : 7B—12(CHURCH)]
Sets the DSP for CHURCH.
6. GAME
[Remote control code : 7B—13(GAME)]
Sets the DSP for GAME.
7. MOVIE
[Remote control code : 7B—14(MOVIE)]
Sets the DSP for MOVIE.
8. LIVE
[Remote control code : 7B—15(LIVE)]
Sets the DSP for LIVE.
9. PC-ANA
[Remote control code : 7B—02(PC)]
Sets the input for PC-ANALOG.
10. PC-Digi
Sets the input for PC-DIGITAL.
11. AUX1-A
[Remote control code : 7B—03(AUX1)]
Sets the input for AUX1-ANALOG.
12. AUX1-D
Sets the input for AUX1-DIGITAL.
13. AUX2-A
[Remote control code : 7B—04(AUX2)]
Sets the input for AUX2-ANALOG.
14. RETURN
Returns the menu to the main menu (3.DSP).
9
4. FL
(FL Test)
This menu is a lighting program for the FL display.
1. AUTO (Automatic FL change)
Changes the display automatically at 1-seond intervals.
All segments light up.
Segments light up in lattice (Pattern A).
Segments light up in lattice (Pattern B)
All segments go off.
2. MANUAL (Manual FL change)
Changes the display every time the DSP key is pressed.
The display contents are the same as the above.
3. RETURN
Returns the menu to the main menu (4. FL).