Safety Instructions - Hammerhead HLCL360 Manual

SAFETY INSTRUCTIONS

Safety Instructions for Self-Leveling 360-Degree Cross Line Laser
WARNING
LASER RADIATION. Do not stare into beam. Class
II laser product. Turn the laser beam on only when
using this tool.
• Do not remove or deface any product labels.
• Avoid direct eye exposure. The laser beam can
cause flash blindness.
• Do not operate the tool around children or allow
children to operate the tool.
• Do not place the tool in a position that may
cause anyone to stare at the laser beam,
whether intentionally or unintentionally.
• Do not use on surfaces, such as sheet steel, that have shiny, reflective
surfaces. The shiny surface could reflect the beam back at the operator.
• Always turn the laser tool off when not in use. Leaving the tool on
increases the risk of someone inadvertently staring into the laser beam.
• Do not attempt to modify the performance of this laser device in any way.
This may result in a dangerous exposure to laser radiation.
• Do not attempt to repair or disassemble the self-leveling 360-degree cross
line laser. If unqualified persons attempt to repair this product, serious injury
may occur. Any repair required on this laser product should be performed only
by qualified service personnel.
• Use of other accessories that have been designed for use, with other laser
tools could result in serious injury.
• Do not place or store tool under extreme temperature conditions.
SELF-LEVELING 360-DEGREE CROSS LINE LASER
CAUTION
PRECAUCIÓN
Model / Modelo : HLCL360
Self-Leveling 360-Degree Cross Line Laser
Láser autonivelante de líneas cruzadas de 360 grados
6V 4×1.5 V AA Battery
6V Batería AA 4×1,5 V
SERIAL NO.
MADE IN CHINA
HECHO EN CHINA SERIE NO.
CAUTION
PRECAUCIÓN
AVOID EXPOSURE-
EVITE LA EXPOSICIÓN-
Laser radiation is emitted
from this aperture
La radiación láser se emite
de esta abertura
3