Pioneer BDP-51FD Service Manual page 45

5
5 During data reading, the indications below will be
displayed. ("LOAD ID DATA" is displayed on the FL
display.)
5
6 After reading of the ID data is completed, writing of the
data on the flash ROM will start. ("WRITE ID DATA" is
displayed on the FL display.)
6
[2] CPRM ID Registration Mode 2
• How to clear the ID No.
1 With the ID No. set, press the ESC then STEREO keys.
2 Input the same number as the set ID No.
2
3 Press the STOP key after the 9-digit number is input.
Only when the input number and the set number
coincide, the set ID No. will be erased, and the unit will
exit this mode.
If the numbers do not coincide, the screen will return to
that in Step 2.
(The STOP key is not accepted after input of a 9-digit
number is finished.)
5
6
7 Upon completion of writing on the flash ROM, "Rom
Write OK!" will be displayed. ("ID DATA OK" will be
displayed on the FL display.)
The background color of the screen will change to blue
when writing of various key data is successfully
completed. If writing fails, the background color will
change to red.
8 Upon completion of writing, press the CLEAR key to exit
Input mode.
7
8
3
• Example of the FL display during numeric input for
the ID No.
When the numerics 0, 1, and 2 are input, in that order:
[ 012]
* If an ID No. is already registered, the registered ID No. is
displayed before you enter any numeric. (The registered
ID No. also remains displayed when a wrong ID No. is
input [NG].)
Before any numeric is input (registered ID: 012345678)
[012345678]
When the first digit (0) is input
[
BDP-51FD
6
7
When writing is successfully completed
When writing fails
0]
7
8
A
B
C
D
E
F
45
8