Panel Facilities - Pioneer BDP-51FD Service Manual

1

2.4 PANEL FACILITIES

[1] Front Panel
A
1
B
1 STANDBY/ON
Press to turn the power on and off.
2 Remote control sensor
Point the remote control to this, then operate it within approximately
7 m.
C
The player may have trouble capturing remote control signals if
there is a fluorescent light nearby. If this happens, move the player
away from the fluorescent light.
3 Front panel display
4 OPEN/CLOSE
Press to open and close the disc tray.
5 RESOLUTION
Press to switch the output video resolution from the HDMI OUT or
COMPONENT VIDEO output terminals.
6
Press to skip to the beginning of the previous title/chapter/track/file.
D
Press and hold to start reverse scanning.
7 /
Press to skip to the beginning of the next title/chapter/track/file.
Press and hold to start forward scanning.
8
Press during playback to pause. Press again to restart playback.
9
Press to stop playback.
E
F
12
1
2
2 3
14 13 12
10
Press to start playback.
11 HDMI indicator
This lights when video signals from the HDMI OUT terminal is
output.
12 Disc tray
13 FL OFF indicator
This lights when Off is selected with FL DIMMER .
14 HD indicator
This lights when an HDMI cable is connected and video signals are
being output with a resolution of 1080/50i, 1080/50p, 720/50p, 1080/
24p, 1080/60i, 1080/60p or 720/60p. It also lights when a component
video cable is connected and video signals are being output with a
resolution of 1080/60i or 720/60p.
BDP-51FD
2
3
4 5 6 7 8 9
11
3
4
10
4