Fast Idle Lever; Emergency Stop Switch - Honda BF40D Owner's Manual

CONTROLS AND FEATURES (R type)
Fast Idle Lever (R1 type)
The fast idle lever is only needed for
starting carbureted outboard models.
The BF40D and BF50D models use
programmed fuel injection so, this
lever will not be needed for starting.
After the engine starts and if the
outside temperature is below 5°C
(41°F), the fast idle lever/fast idle
button can be used to accelerate
engine warm up.
26
(R1 type)
REMOTE CONTROL
LEVER
NEUTRAL
MAXIMUM
FAST IDLE

FAST IDLE LEVER

The fast idle lever will not move
unless the remote control lever is in
the NEUTRAL position. Conversely,
the remote control lever will not
move unless the fast idle lever is in
the lowest position.
Lower the fast idle lever to the lowest
position to decrease the fast idle.

Emergency Stop Switch

(R1 type)
STOP
LOWEST
POSITION
EMERGENCY STOP SWITCH
Press the emergency stop switch to
stop the engine.