Motorhome Ride-Height/Axle Selection; Raise Motorhome; Lower Motorhome; Reset Motorhome To Ride-Height - VB -FullAir 2C User Manual

"Lowering the vehicle makes it easier for people to get in and out, etc."

Motorhome ride-height/axle selection

1. Switch on ignition, apply handbrake. Vehicle standing still or driving at < ± 5 km/h.
2. short press: at vehicle height, one or both LEDs come on.
3. long press: axle selection enabled.
3 sec.
3 sec.

Raise motorhome

1. Switch on ignition. Vehicle standing still or driving at < ± 5 km/h.
2. Keep button pressed until the required level is reached.
The button flashes during raising.
The button is lit continuously when the level is reached.
Alternatively
1. Button - short press. The vehicle is raised to the highest position.
The button flashes during raising.
The button is lit continuously when the highest level is reached.
Ending the function
Button - short press.
Button - short press.
12
3 sec.

Lower motorhome

1. Switch on ignition. Vehicle standing still or driving at < ± 5 km/h.
2. Keep button pressed until the required level is reached.
The button flashes during lowering.
The button is lit continuously when the level is reached.
Alternatively
1. Button - short press. The vehicle is lowered to the lowest position.
The button flashes during lowering.
The button is lit continuously when the lowest level is reached.
Ending the function
Button - short press.
Button - short press.

Reset motorhome to ride-height

From unknown level:
1. Button - short press.
Vehicle is brought to ride-height.
13