"An extra control switch can be fitted - on the rear doors for example."
Commercial vehicle ride height/axle selection
1.
Switch on ignition, apply handbrake. Vehicle standing still or driving at < ± 5 km/h.
2.
short press: at vehicle height, one or both LEDs come on.
3.
long press: axle selection enabled.
3 sec.
3 sec.
Raise commercial vehicle
1.
Switch on ignition, apply handbrake. Vehicle standing still or driving at < ± 5 km/h.
2.
Keep button
pressed until the required level is reached.
The button flashes during raising.
The button is lit continuously when the level is reached.
Alternatively
1.
Button
- short press. The vehicle is raised to the highest position.
The button flashes during raising.
The button is lit continuously when the highest level is reached.
Ending the function
Button
- short press.
Button
- long press.
10
3 sec.
Lower commercial vehicle
1.
Switch on ignition, apply handbrake. Vehicle standing still or driving at < ± 5 km/h.
2.
Keep button
pressed until the required level is reached.
The button flashes during lowering.
The button is lit continuously when the level is reached.
Alternatively
1.
Button
- short press. The vehicle is lowered to the lowest position.
The button flashes during lowering.
The button is lit continuously when the lowest level is reached.
Ending the function
Button
- short press.
Button
- long press.
Reset commercial vehicle to ride-height
From unknown level:
1.
Button
- long press.
Vehicle is brought to ride height.
11