VB -FullAir 2C User Manual page 13

Air suspension systems
Table of Contents

Advertisement

"If your fault does not appear in the table, contact your conversion station (see page 3)."
Basic remote control
On some vehicles the air suspension system has a 'basic remote control'. This remote control has
three fixed modes: highest position, ride height and lowest position.
Check light
1.
Activate manual operation:
The check light comes on for one second:
The system has started correctly.
The check light remains lit:
The vehicle is not at ride height.
The check light keeps flashing:
The system is detecting a fault (see error code for solution).
Switch
1.
Activate manual operation:
From highest position, press switch briefly downwards:
Vehicle sets itself to ride height automatically.
From lowest position, press switch briefly upwards:
Vehicle sets itself to ride-height automatically.
From ride height, press switch briefly downwards:
Vehicle sets itself to the lowest position.
From ride height, press switch briefly upwards:
Vehicle sets itself to the highest position.
Error code
If the system detects a fault, the CHECK-LED on the remote control flashes. If you then press the
SERVICE button, a combination of lit and flashing LEDs on the various buttons provides an error
code.
LEDs on the buttons are off
LEDs on the buttons are flashing
LEDs on the buttons are lit
24
Below are the possible error codes and the faults they refer to.
In view of the many features and options, your remote control may differ from the example
shown. However, the error codes are the same in all cases.
Commercial vehicle
Motorhome
Basic
(2)
(2)
(4)
(4)
(5)
(5)
Description of fault
Remedy
Allow compressor to cool down.
Compressor used too
intensively.
Contact workshop if the fault
Thermal cutout.
keeps coming back.
Allow valve block to cool down.
Valve block used too
intensively.
Contact workshop if the fault
Thermal cutout.
keeps coming back.
Maximum permitted load
Reduce load.
exceeded.
Compressor's maxi-
mum working pressure
Reduce load.
reached.
Battery voltage too low to
Start the vehicle's engine.
raise the air suspension.
Battery voltage too low.
Charge the vehicle's battery.
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vb-fullair 3cVb-fullair 4c

Table of Contents