Vcr Setup Menu; Setup; Channel Preset; Clock - RCA 31-5030 Owner's Manual

SETUP/MENU
5. Press to save and exit.

VCR SETUP MENU

Setup

The VCR Setup menu allows you to adjust miscellaneous system
settings, including Auto Repeat, Blue Screen, Second Audio Program
(SAP) and Audio Output.
TV-VCR
1. Press on the remote control, or rotate
FUNCTION SELECTOR
SETUP/MENU
2. Press to view the VCR Setup Menu.
3. Use d and e to select
SET UP
4. Use the arrow keys to select each of the following, and then
ENTER/SET
press to set your preference.
Auto Repeat: Causes the tape in the VCR deck to repeat
automatically when the end of the tape is reached. Select
OFF
.
Causes a blue screen to appear when a television
Blue Screen:
station with a weak signal is received. Select
Second Audio Program (SAP):
usually a second language, to be broadcast instead of the normal
audio while watching TV (not available for all television
ON
broadcasts). Select or
Sets the audio format from the LINE OUT jacks
Audio Output:
on the back panel of the home theater system. Select MONO, LR
(Stereo), L(eft) or R(ight) channel audio. Set the audio output to
MONO, L or R only if you connect the system to a mono TV
(with a single white audio input jack) and do not wish to use the
surround speakers.
ENTER/SET
5. Press to save and exit.
VCR
to select the function.
ENTER/SET
, and then press
ON OFF
or
Causes a Second Audio Program,
OFF
.

Channel Preset

The Channel Preset menu allows you to specify whether you are
using an antenna or cable and then allows you to search
automatically or manually for local channels.
TV-VCR
1. Press
FUNCTION SELECTOR
SETUP/MENU
2. Press
3. Use the arrow keys to select
ENTER/SET
4. Use the arrow keys to select each of the following, and then
ENTER/SET
press
Air/CATV sets the manner in which you receive television
programs.
Air
Select this option if you are using an indoor/outdoor antenna to
receive local channels.
CATV
Select this option if you have basic cable (CATV) or have
connected a cable box or satellite receiver to the system.
.
Channel Set sets the manner in which television programs will
be saved.
Auto
Select this option to have the system automatically search for all
ON
or
channels that you can receive. This may take several minutes.
Manual
Select this option to add or erase channels manually (see below).
.
Add/Erase Channels
• Use d and e to select the desired channel.
• Use f to add or g to erase the selected channel.
ENTER/SET
5. Press

Clock

The Clock menu allows you to set the time for your home theater
system, which is essential for accurate timer recording.
on the remote control, or rotate
VCR
to select the
to view the VCR Setup Menu.
CHANNEL PRESET
.
to set a preference.
to save and exit.
function.
and then press
17