Installing A Memory Module - Acer Predator P09-600 User Manual

18 - 1 Upgrading your
computer

Installing a memory module

Note
DIMM slots on the mainboard must be installed only in certain configurations.
Numbers next to DIMM slots correspond to installation sequence.
Be sure to install the memory module in DIMM1 slot followed by DIMM2 slot.
1. Select an empty DIMM slot.
2. Remove the new memory module from its packaging, handling it by
the edges.
3. Align then insert the memory module into the DIMM slot (1).
4. Insert the memory to the slot until the retaining clips snap inward (2).
The module is keyed so it can only be inserted in one direction. If the
module does not fit, make sure that the notch in the module lines up
with the tab in the memory slot.
5. Repeat steps 1~4 to install the other memory modules.
2
1