18 - Using the Camera
Taking a photo
1. If necessary, adjust the settings described above.
2. Frame your subject and steady your camera.
3. Tap the Shutter button to take a picture.
Shooting a video
1. Tap the Camcorder button to switch camcorder mode.
2. Frame your subject and steady your camera and zoom in or out as
needed.
3. Tap the Shutter button to start taking a video. Tap the Shutter
button to stop recording video.
Viewing photos and videos
After you have taken your photo or video, it is
automatically saved; you can view it in HoloGallery by
tapping the thumbnail in the corner of the screen or by
opening the HoloGallery app.
HoloGallery allows you to view 360° images. Tap on an
image to open it. You can swipe to move your point of view and zoom
into any point in the image.
Organizing albums
Tap the text at the top of the screen to
organize your images into Times or
Locations.
Note
To organize by Location, turn on the
Location setting before taking photos or
videos.
After selecting an album, you may choose
to view the 360 Raw images (images and
videos taken in 360° mode), or Collections
of standard images and videos.
See Settings on page 17
.