Samsung ML-2251N/XAA Service Manual page 47

5.10 SMPS
1. Before you remove the SMPS, you should
remove:
- Front Cover
- Rear Cover
- Side Cover(LH, RH)
- Top Cover
2. Unplug one connector and remove three screws
then take the Inlet Bracket out.
Inlet Bracket
3. Remove the two screws and remove the
Network Board.
Memory Board
Samsung Electronics
Disassembly and Reassembly
4. Unplug one connector from the Main PBA.
Connector
5. Remove the six screws and take the Main
Board.
Main PBA
Service Manual
5-9