Table of Contents
Advertisement
4.2 Main Menu Overview
The Main Menu offers access to all functions within the panel. As shown in Table 4.2 below, the functions
are organized into three sections with step-by-step instructions.
Table 4.2
Primary functions overview
Section
View Status Options
View Status Options (both LCD
and Service Terminal Interface)
Silence Alarm & Backup Log Files
(Service Terminal Interface)
page 49 - Silence Alarm &
Backup Log Files (Service
Terminal Interface only)
System and Control Options
page 53 - System and Control
Options (some functions available
via Service Terminal Interface
only)
4.3 LCD Menu Overview
Figure 4.1 on the facing page shows an overview of the initial screens available through the LCD
interface. For comparable information about the Service Terminal Interface screens, see Overview of
Menus.
Vertiv | Liebert® AC8 User Manual |
Description
These features are available to all users. This permits all personnel to check the status of any monitored
equipment or location. From this menu, any user may:
View current monitoring data—active alarms and the status of inputs and outputs
on page 35 -
View data stored in alarm, event and trend logs
View pager numbers
View auto sequencing and standby testing status
These features—available via the Service Terminal Interface only—allow users to:
on
Silence the audible alarm
Back up the alarm, event and trend logs
These options require a password. Authorized users may:
on
Configure the Liebert AC8
Override automatic control of outputs to force an output ON or OFF
Clear active alarms and delete all records in the alarm, event and trend logs
32
Advertisement
Table of Contents
