Advertisement
e.
Run the outside antenna cable into the building
•
Carefully arrange the cable along the building outside
making sure are no sharp bends;
•
Fix the cable at each corner;
Step 2: mount the inside antenna (sold separately)
a.
Choose right position
•
20cm (0.6ft) away from any other metallic objects;
•
50cm (1.6ft) away from any windows;
•
For the panel type antennas, position at the end of the
building is recommended;
b. Mount the inside antenna;
c.
Connect the inside cable to the inside antenna;
For HA72170-NF operational manual, please visit www.L-com.com
IP-00136 Rev A 02/19/16
© L-com, Inc. All rights reserved. L-com Global Connectivity and the L-com logo are registered marks.
Step 3: arrange the booster
a.
Choose position
•
Be sure to mount away from any heat source;
•
In a ventilated dry place, temperature range should
-5° to +50° C (23° to 122° F);
b. Connect the outside antenna's connector to the "outside"
labeled port of the booster;
c.
Connect the inside antenna's connector to the "inside"
labeled port of the booster;
Inside antenna
Adapter cord
Step 4: power on the booster
a.
Plug the power adapter to the AC power;
b. Attach the cord of the adapter to the booster;
www.L-com.com
Outside antenna
Advertisement
