l-com HA72170-NF Installation Manual

HA72170-NF Installation Guide

1.Operational overview

Step 1: The powerful outside antenna captures voice and
data signal and transfers it to the booster;
Step 2: The booster receives the signal, amplifies it and
rebroadcasts it by inside mounted antenna.
Step 3: Your mobile devices get a better signal, never
experience dropped calls or slow data speed.
Supported Carriers
• AT&T 2G/3G/4G (HSPA+ & LTE)
• Verizon 3G/4G
• T-Mobile 2G/3G/4G
• Sprint 3G/4G
• US Cellular 3G/4G
• Metro PCS 3G/4G
• Major Canadian Carriers 2G/3G/4G
• All other carriers using 700MHz, 750MHz, 850MHz and
1900 MHz
Coverage Area
Note: The ability of coverage depends on output power of
booster. Any boost has a limit of amplification factor, so final
output power is related to received signal power level at the
outdoor mounted antenna.
Power level
at outdoor mounted antenna location
Strong (5 bars on the cellphone)
Medium (3~4 bars on the cellphone)
Weak (1~2 bars on the cellphone)
IP-00136 Rev A 02/19/16
© L-com, Inc. All rights reserved. L-com Global Connectivity and the L-com logo are registered marks.
2. Step by step installation
Step 1: Mount the outside antenna (sold separately)
a.
•
•
•
b. Securely mount the outside antenna using hardware
c.
•
•
Coverage Area
(sq. ft.)
12000
8000
800
Choose right position
Find the strongest signal position in the possible in
stall locations by read your cell phone signal bar;
30cm (1.0ft) away from any other metallic objects;
100cm (3.3ft) away from any windows;
supplied with antenna or one of the available
mounts available from L-com.
Connect outside cable to the antenna
Make sure connectors are securely fastened
Seal the connectors with weatherproof tape
www.L-com.com