Table of Contents
Advertisement
Installation/operation flows
Installation flow
The installation flow of the extension unit is as follows.
Rack mounting
1
☞ Page 16
Connection
2
☞ Page 18
Turn on the devices
3
☞ Page 19
HDD unit
4
(Install the HDD units)
☞ Page 23
About the operation
The extension unit requires the recorder to set the operational mode of the HDD units or format them. Perform the setting using
the connected recorder.
Refer to the Operating Instructions of a corresponding recorder for further information.
Install the extension unit in the rack.
Go to step 2 when not installing it in the rack.
Connect the extension unit to the recorder.
Turn on the power of the extension unit.
Turn on the power of the extension unit before turning on the
power of the recorder.
Install the HDD units through the HDD insertion slot on the
front cover of the unit.
15
Advertisement
Table of Contents
