Connect The Unit To Your Pc - Sanyo DMP-M400SD Instruction Manual

Connect the unit to your PC

Insert SD Card into SD Card slot before connecting to a PC.
Note:
- Do not use an USB hub or USB extension cable (Operation is not guaranteed).
Use only the supplied USB connection cable for connection.
- When you connect the unit to the PC for the first time, it sometimes may not be
recognized as a Removable Disk. In this case, disconnect the unit and reconnect
it again.
- The unit will operate without battery while the unit is connected to the PC.
- A USB driver is required for Windows 98SE.
The USB driver must be installed from the CD-ROM (Supplied) before
connecting the unit to your PC.
GB-11
CONNECT
[ENGLISH]
USB