Before Installation, Take The Wall Material Into Consideration; If It Is Installed By Using A Method Inappropriate For The Wall Material, The Board Might Fall; Wall-Mounting Setup Method - HitachiSoft StarBoard FX-77 User Manual

StarBoard FX-77/FX-63/FX-82W

1.3.2 Wall-Mounting Setup Method

(1) Install the mounting brackets.
Determine the height at which the board will be installed, and install the brackets at
the positions shown in the following diagram.

Before installation, take the wall material into consideration.

If it is installed by using a method inappropriate for the wall material, the board
might fall.
Also, installation might be impossible, depending on the wall selected. For details,
consult your dealer.
Before installation, take the wall strength into consideration.
Before using the StarBoard, make sure that it has been fastened securely so that it
will not fall. Also verify that the wall mounting bracket is strong enough to support
a weight of approximately 88.2lb. /40 kg.
1108±2mm/
43.6±0.1inch
Floor
CAUTION
1-8
Introduction
107mm/4.2inch
Height
Height
English