Easy@Home CRSF-16BI User Manual page 5

Pedestal Fan
 With the fan in an upright position, loosen the screw on the grill ring, but do not remove.
Place the screw end of the grill ring on the bottom of the back grill and gently maneuver
the ring onto the rim of the back grill as you work your way up the sides of the rim.
 Starting at the bottom, gently snap the front grill into the grill ring, working your way up
the sides of the rim until it's in place.
 Tighten the grill ring screw with a Phillips head screwdriver until there is approximately a
¼" or more gap between the 2 ends of the grill ring. DO NOT ATTEMPT TO CLOSE
THE GAP.
 To adjust the height of the extension pole, unscrew the white cap slightly until the chrome
inner pole is able to slide up and down. Adjust the pole to your desired height and tighten
the knob securely. Do NOT hang the fan or place anything on the fan.
 To adjust the tilt of the fan head, unscrew the tilt head knob slightly and push or pull the
fan head back or forward gently until you get the right angle for your purposes. Tighten
the tilt head knob securely.
 To operate the oscillation feature, push down on the oscillation knob. To stop the
oscillation feature, pull up on the oscillation knob. To move the fan, use the handle on the
back of the motor housing.
 To control the speed of the fan, use the control buttons on the front of the fan motor
housing. (0) is OFF, (1) is LOW, (2) is MEDIUM, and (3) is HIGH.
AFTER SALES SUPPORT
888-367-7373
________________________________________ASSEMBLY
customer-service@wk-usa.com
5