Factory Reset; Step 1: Uninstall Fortisiem Application; Step 2: Reinstall Fortisiem Application - Fortinet FortiSIEM 2000F Hardware Configuration Manual

Factory Reset

Factory Reset
Follow the steps below to perform factory reset on FortiSIEM FSM-2000F.

Step 1: Uninstall FortiSIEM application

1. Connect FortiSIEM device using VGA or Console port.
2. Login as ' admin ' user without password.
3. To check the available FortiSIEM commands, run sudo get.
4. To uninstall FortiSIEM, run sudo execute fsm-clean.
This script will uninstall FortiSIEM application.

Step 2: Reinstall FortiSIEM application

1. Power on the hardware.
2. Login as ' admin ' without password.
3. To configure RAID, run execute format disk.
4. To check Hardware status and RAID information, run diagnose hardware info.
5. To install FortiSIEM, run execute factoryreset.
This script takes 5 minutes to complete FortiSIEM installation.
6. To configure network on FortiSIEM, stop FortiSIEM services by running sudo execute preparebox.
This script will stop running FortiSIEM services and power offs the hardware.
Follow the steps under
FortiSIEM - 2000F Hardware Configuration Guide
Fortinet Technologies Inc.
to configure FSM-2000F.
Appliance Setup
7