Appliance Setup
Command
get system status
diagnose hardware info
diagnose interface detail port1
5.
Step 4: Configure Network
1. On the hardware console, select Set Timezone and then press Enter .
2. Select your Location, and then press Enter .
3. Select your Country, and then press Enter .
4. Select your Timezone, and then press Enter .
5. Review your Timezone information, select 1 , and then press Enter .
6. When the Configuration screen reloads, select Login , and then press Enter .
7. Enter the default login credentials:
Login
Password
8. Run the vami_config_net script to configure the network.
/opt/vmware/share/vami/vami_config_net
9. When prompted, enter the information for these network components to configure the Static IP address: IP
Address , Netmask , Gateway , DNS Server (s).
The authenticated proxy server is not supported in this version of FortiSIEM.
Note:
10. Press Y to accept the network configuration settings.
11. Enter the Host name, and then press Enter .
Once the configuration is complete, the system reboots automatically.
Step 5: Generate FortiSIEM FSM-2000F License Key file from FortiCare
1. Obtain the Hardware Serial Number from FSM-2000F appliance.
2. Follow 'FortiSIEM Licensing Guide'
Number' for Hardware ID.
Step 6: Register FortiSIEM License
1. Note the IP Address assigned to FortiSIEM VM in
2. Access FortiSIEM VM from browser (https://<FortiSIEM-IP>).
3. Upload the license file obtained from
choice can only be made once and is not reversible):
Enterprise for single organizations
l
Service Provider for multiple organizations
l
FortiSIEM - 2000F Hardware Configuration Guide
Fortinet Technologies Inc.
Description
Displays system name, version and serial number.
Displays system hardware information like CPUs, Memory
and RAID information.
Displays interface status.
root
ProspectHills
here
to generate the license key file - remember to use 'Hardware Serial
Step
4.
Step 5
and select the
License Type based on your deployment (note this
5