Appliance Setup; Step 1: Rack Mount The Fsm-2000F Appliance; Step 2: Power On The Fsm-2000F Appliance; Step 3: Verify System Information - Fortinet FortiSIEM 2000F Hardware Configuration Manual

Appliance Setup

Follow the steps below to setup FSM-2000F appliance.

Step 1: Rack mount the FSM-2000F appliance

1. Follow FortiSIEM 2000F QuickStart Guide
2. Insert Hard Disks positions as shown below:
3. Connect FSM-2000F to the network by connecting an Ethernet cable to Port1.

Step 2: Power On the FSM-2000F appliance

1. Make sure the FSM-2000F device is connected to a Power outlet and an Ethernet cable is connected to Port1.
2. Power On the FSM-2000F device.

Step 3: Verify System Information

1. Connect to the FSM-2000F appliance using VGA port or Console port.
2. Login as ' root ' user with password 'ProspectHills'.
3. Run get to check the available FortiSIEM commands.
4. Use the below commands to check the hardware information. After running each command, ensure that there are
no errors in the displayed output.
4
here
Before proceeding to the next step, connecting Ethernet cable to Port1 is required for
Network configuration.
FSM-2000F appliance does not have a default IP address. To connect to the GUI, an
IP address must be configured using the CLI
to mount FSM-2000F into rack.
(Step 4).
FortiSIEM - 2000F Hardware Configuration Guide
Appliance Setup
Fortinet Technologies Inc.