ʺMode Conflictʺ Message - Daikin BRC073A4 User Reference Manual

Reference Information
ʺMode Conflictʺ message
10
Mode conflict
• The units that do not have priority enter standby mode
This is not a malfunction. To solve the conflict, make the units that do not have priority run in the
same operation mode as that of the unit that has priority. Which unit has priority depends on whether
the Priority Room setting is present and/or active:
The Priority Room
active.
NOTICE
• COOL, DRY and FAN operation can be used simultaneously.
• If the conflict is not solved manually, non-priority units will automatically resume operation as
soon as the priority unit stops operating.
The Priority Room
present but not active.
NOTICE
• COOL, DRY and FAN operation can be used simultaneously.
• Units running in HEAT operation mode always have priority over units running in FAN
operation mode, even if they were not turned on first.
• When solving the conflict, it is possible to make the non-priority units run in AUTO operation
mode: they will automatically start operation in the same operation mode as that of the
priority unit.
User reference guide
42
Only applicable in case of a multi system (multiple indoor units
connected to the outdoor unit). When multiple indoor units are
instructed to operate simultaneously, but in different operation
°C
modes, an operation mode conflict occurs:
• The operation lamp flashes
• Mode conflict
If...
setting is present and
If...
setting is not present OR
appears on the user interface
The operation mode of the indoor unit to which
the Priority Room setting is applied takes
priority. In case of an operation mode conflict,
the other units will enter standby mode.
The operation mode of the indoor unit that was
turned on first takes priority. In case of an
operation mode conflict, the units that were
turned on later will enter standby mode.
Then...
Then...
BRC0731A4
3P422724-1