RCA Scenium L26WD14 User Manual page 39

Picture
Go back
Picture Preset
Brightness
Color
Sharpness
Tint
Contrast
Color warmth
Advanced Settings
Advanced settings
Go back
Film mode
Noise Reduction
Chapter 4
1668591B.indb 39 1668591B.indb 39
Using the TV's Menu System
Color Warmth Displays a choice list that lets you set one of three
automatic color adjustments: Cool for a more blue palette of picture
colors; Normal; or Warm for a more red palette of picture colors. The
Sports...
warm setting corresponds to the NTSC standard of 6500 K.
When you change any of these picture settings, the Picture Preset
changes to Personal. Use the left or right arrow button to make
adjustments. To return to the Picture menu, press the up or down
Warm...
arrow button.
...
Advanced picture settings (not available on VGA)
Advanced...
Film mode (3:2 Pulldown) Automatically detects video sources
that were originally recorded on fi lm (like most movies) and
subsequently converted to a different format (for TV broadcast,
for example). Film mode processes the converted signal so that it
looks as close as possible to the original. Another name for this
process is reverse 3:2 pulldown.
Advanced (recommended) enables the feature only
when the TV detects that movie playback quality could be
improved. Advanced is the default setting.
The On setting should only be used in rare circumstances
when the TV is used solely with fi lm-based sources (like
DVDs on a non-progressive-scan player).
The Off setting turns off fi lm mode upconversion. Try using
this setting if you think the reverse 3:2 pulldown is causing
distortions in your picture.
Reduces picture "static" or any type of
Noise reduction
interference. This feature is especially useful for providing a clearer
picture in weak analog signal conditions. Press the right arrow
to choose between: Off for no noise reduction; Low for a softer,
smoother picture that retains picture sharpness and detail; Medium
for a slightly softer picture than the Low setting; High for an even
softer, smoother picture than the other settings (the picture detail is
somewhat decreased).
Note: Video noise reduction is available for the CMP1 and
CMP2 inputs only if the signal is 480i.
39
6/5/06 3:28:25 PM 6/5/06 3:28:25 PM