Using The Remote Control; Using The Input Button; Programming The Remote To Operate Other Devices; Find Out If You Need To Program The Remote - RCA Scenium L26WD14 User Manual

Using the Remote Control

SAT•AUX Places the remote in SAT•AUX mode. If Auto Tuning is enabled, turns on the TV
and tunes it to the satellite or cable box Video Input Channel. This button lights when you
press a valid button in SAT•AUX mode (see Modes of Operation on page 22 for more details).
SUB CH When entering a digital channel that has a subchannel, press this button to access
the subchannel entry fi eld. Once the channel is entered, press the OK button to tune to the
channel.
TV Turns on the TV and puts the remote in TV mode. Also displays current status.
VOL – or VOL + Decreases or increases the TV's volume. To program this button to work
with an audio system, follow the instructions for Volume Punchthrough Feature on page 22.
ZOOM– or ZOOM + When viewing a channel, press to change the screen format: 4/3, 16/9
zoom, Cinerama, and 16/9. Go to page 33 for more information on screen formats.

Using the INPUT Button

Use the INPUT button to scroll through the available video input channels and view devices
you have connected to the TV.
1. Make sure the device you want to view is turned ON.
2. Press INPUT to tune to an available video input source and view the device.
3. To return to the previous channel, press INPUT until you return to the channel.
ON•OFF
TV
SAT•AUX DVD
GO BACK
VOL
MUTE
INFO
MENU
ZOOM-
CLEAR
PRESETS
INPUT
The darkened buttons are the device buttons
that can be programmed.
20
1668591B.indb 20 1668591B.indb 20
Programming the Remote to
Operate Other Devices
PIP
The universal remote can be programmed to operate many brands of
remote-controllable VCRs, audio devices, DVD players, cable boxes,
satellite receivers and other devices. In addition to being programmed
CH
to operate your television, it's already programmed to operate some
RCA devices.
+
CH CTRL
Notes: The TV button can't be programmed on this remote to
control any device; it controls only this TV.
ZOOM+
The remote may not be compatible with all models of all brands
GUIDE
of devices. It also may not operate all functions of your device.

Find Out If You Need to Program the Remote

To determine whether the universal remote needs to be programmed
to operate one of the devices connected to your TV, such as a VCR, do
the following:
SUB CH
1. Turn on the device (in this example, a VCR).
2. Point the remote at the device.
3. Press the corresponding device button (in this example, VCR).
4. Press ON•OFF to see if the VCR responds. If the VCR doesn't
respond, you need to program the remote to operate it.
Chapter 2
6/5/06 3:28:12 PM 6/5/06 3:28:12 PM