Advertisement
Upper duct cover hook
Upper duct cover
Upper duct cover
Low duct cover
Upper duct cover
Low duct cover
9
Step 2:
Fix the upper duct cover hook to the upper
duct cover with M4 screws.
Step 3:
Put the upper duct cover to the low duct
cover.Please kindly note that the upper
duct cover must fix to the low duct cover's
orientation slot.
Step 4:
Matching the holes of low duct cover to the
using 8pcs M4 ×
blower box assembly and
10 screws
fix the low duct cover to the
blower box assembly ,as the direction of
illustrated.
Step 5:
Fix the position of the chimney in
accordance with the recommend-ed height
between 650mm to 750 mm from the hob
and the lower edge of the chimney.
Ducting Mode
Cassette filters&Metal grease filters need to be cleaned every one month.But this
may vary on usage pattern also.In case large amount of oil is used for cooking,
same has to be cleaned after very week/fortnight.Filters can be easily clean,just
put then in a soap solution of hot water&clean with a brush&
then rinse under a running tap water&then wipe with a dry
cloth.Refix the filters properly.Instructions for removing
&for refit push the filter lock backward to release
the filter from the slot.
NOTE:Use of optional charcoal filter or ducting mode is
left to the installer.However in that case chimney has to be
used up to 2nd speed only.
LIGHTS
To replace led lamp(pic2)
Caution: LED lamp can not replace a new bulb, just can replace a new LED Lamp. Make sure all the
control switches are off, and the chimney is unplugged! Please follow below instructions:
1.Take out the filters, and cut off the wire connection of the lamp.
2.Press the spring according to the arrow direction, then you can take off the lamp unit.
3.You can replace a new LED lamp unit no more then rating!
4. Then put the lamp unit to the chimney in reverse direction.
Connect the wire of the lamp.
5. Fit on the filters.
To replace normal lamp bulb(Pic.3)
Caution :lamp unit may be hot! Wait until it's cool.Use the same type light bulb!
Make sure all the control switches are off, and the chimney is unplugged!
Please follow below instructions:
Warning: Make sure the bulb is cool before you touch it!
1.Take out the filters.
2.Loose the old light bulb.
3.Replace a new light bulb which is the same type no
more then rating!
4.Fit on the filters.
CLEANING
It's recommended to use a damp cloth & mild house hold cleaner or any special Cleaner
meant for cleaning the chimney hob & cook top.
Never use a wet cloth, sponge or running water.
Never use thinner or products containing alcohol as they might damage the paint work.
Never use abrasive cleaning materials on painted & stainless steel surface.
Take care that the filters don't bend them while washing.
Cleaning process must be done after 2 hours of the cooking process.
A
pic1
pic2
Pic.3
18
Advertisement
