Maverick ET-735 Instruction Manual

Barbecue bluetooth thermometer

Hide thumbs Also See for ET-735:

User manual (16 pages)

Table Of Contents

Quick Links

Download this manual See also: User Manual

INSTRUCTION MANUAL

MODEL: ET-735 Maverick Redi Chek Barbecue Bluetooth Thermometer

Congratulations on purchasing the

ET-735. This unit will allow you to monitor the temperature of your food cooking

in the oven or on the grill via Bluetooth to your Smart Phone or Tablet in your

home. This unit will beep to alert you when your food is ready or your BBQ

temperature is out of the range you set.

Components

Maverick Redi Chek Barbecue Bluetooth Thermometer

2. Two detachable waterproof stainless steel food probes

3. Wire Stand

Thermometer Features

Front View

A. LCD (Liquid Crystal Display) – Displays all icons and temperature

1. Temperature Value – indicates the current temperature of the probes

2. Probe Number – indicates the current probe number being displayed

3. Cycling Icon – the device is in display cycling mode

4. Alert Sound – indication of Alert Sound is set

5. Bluetooth Icon – indicates the connection status of Bluetooth

6. Battery Status – indicates the status of the batteries

7. Temperature Units of measure – either °C/°F

8. The thermometer comes with the ability to monitor 4 probes. This

model comes with 2 probes. Additional probes can be purchased. See

the probe ordering section after the warranty.

B. Battery Compartment – Holds AAA x2 batteries.

Maverick Redi Chek Barbecue Bluetooth Thermometer

main unit

Back View

Side View

Table of Contents

Summary of Contents for Maverick ET-735

Page 1 Congratulations on purchasing the Maverick Redi Chek Barbecue Bluetooth Thermometer ET-735. This unit will allow you to monitor the temperature of your food cooking in the oven or on the grill via Bluetooth to your Smart Phone or Tablet in your home.
Page 2 Open the battery compartment of the ET-735 by screw driver and insert two “AAA” batteries (not included) oriented with correct polarity C. Wire Stand – Allows you to stand the thermometer on a tabletop or it can be reversed and used as a hanger.
Page 3 2. Press and hold the Power/Probe for 2 seconds to turn on the ET-735 3. Please go back to the “Redi Chek” app on your smartphone and pair the ET-735 and your smartphone in the app. 4. Only pair the Barbecue Thermometer through the app, not through the Bluetooth settings.
Page 4 The app has already been programmed with pre-set temperatures for selected types of food. The user can choose the food for suitable preset temperature via the app. These temperatures are recommended by both major cookbooks and the USDA for food safety. The chart of the selected temperatures is as follows: Taste Food Well Done...
Page 5 beep with the alarm icon as well as the temperature segment flashing under below conditions: 1. When the current temperature hits set temperature. 2. When the current temperature has exceeded the high set temperature in Barbecue mode. 3. When the current temperature has fallen below the low set temperature in Barbecue mode.
Page 6 Cleaning: 1. Always wear a heat resistant glove to touch the stainless steel probe sensors or wires during or just after cooking. Do not touch with bare hands. 2. Keep the stainless steel probe sensors and wires away from children. 3.
Page 7 Should any repairs or servicing under this warranty be required, contact Maverick Customer Service by email or mail for instruction on how to pack and ship the ET-735 Redi Chek Barbecue Bluetooth Thermometer to Maverick’s National Service Center located as follows: Maverick Customer Service 94 Mayfield Ave.