Table of Contents
Advertisement
Using the TV's Menu System
Main Menu
Connections
0
Select what should occur when power is restored to the TV:
Go Back
Off: Initial Channel is disabled
1
Initial Channel
On: Go to last input or channel selected
2
Initial Volume
On: Go to
Cable Input
3
Maximum Volume
+
Channel
27
Sub-channel
-
4
CableCARD Tools
Note: An Initial Channel setting of "On" will be enabled only
5
CableCARD Reset
when the TV is plugged back in or electricity is otherwise
restored to the TV. Initial Channel is not enabled from the
6
turning on of the TV with the remote or front buttons.
Remote Setup
Press
or
to point to an option, then press OK to
select it. Press
to return to the menu.
4
Main Menu
Connections
0
Go Back
Network Setup
1
Initial Channel
CableCARD™ Status
CableCARD™ Pairing
2
Initial Volume
Conditional Access
3
Maximum Volume
4
CableCARD Tools
5
CableCARD Reset
6
Remote Setup
Press 5 or 6 to point to an option, then press OK to
select it. Press 3 to return to the menu.
This screen is provided by
your local cable TV company.
Continue
4
Main Menu
Connections
0
Go Back
Select the remote mode that this TV should respond to:
TV (default)
1
Initial Channel
TV2
2
Initial Volume
TV3
3
Maximum Volume
Use this screen if you want to set up this RCA TV
to respond to a different RCA TV remote mode. By
4
CableCARD Tools
doing so, you can independently control two RCA
TVs that are near each other simply by changing the mode
5
CableCARD Reset
of the remote. A third RCA TV can be added to the
same location and controlled separately if it has this screen
6
Remote Setup
and is set up to respond to a remote mode that is different
than the first two RCA TVs.
Remote Setup can be used to control up to three TV's in the
same location. Press OK to continue.
Main Menu
0
The Preferences menu has screens for setting up the TV to
Go Back
match your personal preferences:
1
Picture Quality
•Closed Captioning: Choose the look and type of captions.
2
Audio
•Screen Format: How to format a picture on the 16:9 screen.
3
•Time Menu: Set up time-related features.
Parental Controls
•Color Scheme: Pick a color for the menu system.
4
Connections
•Translucency: Pick a level of translucency for the menus.
5
Preferences
•Menu Language: Select from English, Español, and Français.
•Lamp Power: Set the TV's lamp to a preferred brightness.
6
Assisted Setup
Press OK or4to access the Preferences menu.
58
Special Features
Special Features
The special features options are mostly intended for commercial/retail use.
+
9
-
4
Special Features
4
Special Features
Preferences Menu
The Preferences menu allows you to change some aspects of your TV to fi t your
personal preferences. Features in the Preferences menu are: Closed Captioning,
Screen Format, Time Menu, Color Scheme, Translucency, Menu Language, and
Lamp Power.
Initial Channel You can select the tuner and channel or input that your
TV tunes to each time the TV is turned on by plugging it back in.
Initial Volume This feature works only if the Initial Channel feature is set
to On. Select the volume level that you want when the TV is turned on.
Maximum Volume This feature is intended to stop the volume from
being turned up too loudly. Set the volume at the loudest level you would
want to hear.
CableCARD Tools Displays information available for digital cable TV
services when a digital cable card is inserted into the back of the TV and
you have subscribed to digital cable service. Go to page 18 for more
information on using a digital cable card.
The CableCARD Tools information might vary according to the brand of card
you have inserted into your TV. The graphic to the left is an example of
what you might see. Select an option to view more information.
Some CableCARD Tools screens might have additional information displayed
on more than one page. Use the arrow buttons on the remote to highlight
the blue Continue link at the bottom of the page, for example, as the
graphic to the left shows, and simply press the OK button on the remote
to read more text. If more than one link appears, use the arrow buttons to
highlight the one you want. To exit the screen, press CLEAR on the remote.
CableCARD Reset If you experience problems with your digital cable,
try resetting your digital cable card. Press the right arrow to select Reset and
then press the OK button on the remote. If problems persist, contact your
cable company.
Remote Setup This features allows you to control three different RCA TVs.
This is helpful if you have two or three RCA TVs near each other, and they
also have this menu option, but you want to control them independent
of each other. Program a second RCA TV to the DVD, VCR, AUX•HD,
SAT•CABLE, or AUDIO device button, using the TV2 code 1222. Select the
TV2 option in that TV's Remote Setup menu. If you have a third RCA TV,
program a device button using the TV3 code 1223. Select the TV3 option
in that TV's Remote Setup menu. Go to Chapter 2 for more information on
programming your remote.
Chapter 4
Advertisement
Table of Contents
