Lenovo Tablet 10 User Manual page 43

USB
• USB UEFI BIOS Support
Values: Disabled, Enabled
Description: Enable or disable the boot support for USB storage devices.
Display
• Boot Display Device
Values: Lenovo LCD, External Display
Description: Select the display device that you want to activate at boot time. This selection is effective for
boot time, password prompt, and Lenovo Setup. You can attach an external display to the USB-C
connector or HDMI connector on your computer. If multiple displays are attached, the first recognized one
will be activated at boot time.
• Total Graphics Memory
Values: 256 MB, 512 MB
Description: Allocate the total memory which Intel internal graphics shares.
Note: If you select 512 MB, the maximum usable memory might be reduced on the 32-bit operating
system.
• Boot Time Extension
Values: Disabled, 1 second, 2 seconds, 3 seconds, 5 seconds, 10 seconds
Description: This option defines the amount of time to extend the boot process, in seconds. The system
cannot detect some external monitors during boot because they need a few seconds to be ready. Try this
option if the monitor being used does not display the boot screen.
Power
®
• Intel SpeedStep technology
Values: Disabled, Enabled
Description: Select the mode of Intel SpeedStep technology at runtime. If you select Disabled, the highest
speed, and runtime is not supported.
– Mode for AC
Values: Maximum Performance, Battery Optimized
Description: Maximum Performance: Always highest speed
– Mode for Battery
Values: Maximum Performance, Battery Optimized
Description: Battery Optimized: Always lowest speed
• Adaptive Thermal Management
Description: Select a thermal management scheme to use. The scheme affects fan sound, temperature,
and performance.
– Scheme for AC
Values: Maximum Performance, Balanced
Description: Maximum Performance: Reduce CPU throttling. Balanced: Balanced sound,
temperature and performance.
– Scheme for Battery
Values: Maximum Performance, Balanced
.
Chapter 5 Advanced configuration
29