Using A Microsd Card - Lenovo Tablet 10 User Manual

2. Tap Settings ➙ Network & Internet ➙ Airplane mode.
3. Tap the NFC control to turn it on.
If you still cannot enable the NFC feature, check the NFC setting in the Lenovo Tablet Setup app by doing
the following:
1. Open the Lenovo Tablet Setup app. See "Lenovo Tablet Setup app" on page 27.
2. Tap Security ➙ I/O Port Access.
3. Set the NFC option to On.

Using a microSD card

Your computer has a nano-SIM-card and microSD card slot on the left side of the computer. The slot
supports the following types of Secure Digital (SD) cards:
• Secure Digital eXtended-Capacity (SDXC) card
• Secure Digital (SD) card
• Secure Digital High-Capacity (SDHC) card
This section provides the basic instructions on installing and removing the microSD card. For more
information about data transfer, refer to the documentation of the microSD card.
Attention:
• Before handling the microSD card, touch a metal table or a grounded metal object. Otherwise the card
might get damaged by the static electricity from your body.
• During the data transfer, do not put your computer into sleep mode; otherwise, your data could get
damaged.
To replace or install a microSD card:
1. Insert a straightened paper clip into the hole in the tray
computer. If a microSD card is installed, gently take the microSD card out of the tray
14
Lenovo Tablet 10 User Guide
1 . The tray ejects. Then, slide the tray out of the
2 .